Acrolinx 6

exchange/exchange-ps/ExchangePowerShell/Get-DataEncryptionPolicy.md

@@ -34,7 +34,7 @@ Data encryption policy cmdlets are the Exchange Online part of Customer Key. For
 
 You can assign a data encryption policy to a mailbox by using the DataEncryptionPolicy parameter on the Set-Mailbox cmdlet in Exchange Online PowerShell.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DeliveryAgentConnector.md

@@ -30,7 +30,7 @@ Get-DeliveryAgentConnector [[-Identity] <DeliveryAgentConnectorIdParameter>]
 ## DESCRIPTION
 Delivery agent connectors are used to route messages addressed to foreign systems that don't use the SMTP protocol. When a message is routed to a delivery agent connector, the associated delivery agent performs the content conversion and message delivery. Delivery agent connectors allow queue management of foreign connectors, thereby eliminating the need for storing messages on the file system in Drop and Pickup directories. For more information, see [Delivery agents and Delivery Agent connectors](https://learn.microsoft.com/exchange/delivery-agents-and-delivery-agent-connectors-exchange-2013-help).
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DetailZapReport.md

@@ -48,7 +48,7 @@ If you append the command with ` | Format-List`, the following additional inform
 - Delivery Status
 - Detection Technology
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DetailsTemplate.md

@@ -32,7 +32,7 @@ Get-DetailsTemplate [[-Identity] <DetailsTemplateIdParameter>]
 ## DESCRIPTION
 The Get-DetailsTemplate cmdlet retrieves the attributes for one or more details templates. Wildcard characters can be used when specifying the type and language of the details templates.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DistributionGroup.md

@@ -85,7 +85,7 @@ Get-DistributionGroup [-Credential <PSCredential>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DistributionGroupMember.md

@@ -35,7 +35,7 @@ Get-DistributionGroupMember [-Identity] <DistributionGroupMemberIdParameter>
 ## DESCRIPTION
 If your organization has multiple Active Directory domains, you might need to run the Set-ADServerSettings cmdlet with the ViewEntireForest parameter set to $true before running the Get-DistributionGroupMember cmdlet to view the entire forest. For more information, see Example 2.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DkimSigningConfig.md

@@ -29,7 +29,7 @@ Get-DkimSigningConfig [[-Identity] <DkimSigningConfigIdParameter>]
 ## DESCRIPTION
 DKIM in Microsoft 365 is an email authentication method that uses a public key infrastructure (PKI), message headers and CNAME records in DNS to authenticate the message sender, which is stamped in the DKIM-Signature header field. DKIM helps prevent forged sender email addresses (also known as spoofing) by verifying that the ___domain in the From address matches the ___domain in the DKIM-Signature header field.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DlpDetailReport.md

@@ -61,7 +61,7 @@ The Get-DlpDetailReport cmdlet returns detailed information about specific DLP r
 
 To see DLP detection data that's aggregated per day, use the [Get-DlpDetectionsReport](https://learn.microsoft.com/powershell/module/exchangepowershell/get-dlpdetectionsreport) cmdlet.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DlpDetectionsReport.md

@@ -53,7 +53,7 @@ To see all of these columns (width issues), write the output to a file. For exam
 
 To see detailed information about each DLP rule match, use the Get-DlpDetailReport cmdlet.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DlpIncidentDetailReport.md

@@ -66,7 +66,7 @@ The output of the Get-DlpIncidentDetailReport cmdlet includes the following prop
 - SensitiveInformationCountList
 - SensitiveInformationConfidenceList
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DlpPolicy.md

@@ -30,7 +30,7 @@ Get-DlpPolicy [[-Identity] <DlpPolicyIdParameter>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DlpPolicyTemplate.md

@@ -30,7 +30,7 @@ Get-DlpPolicyTemplate [[-Identity] <DlpPolicyIdParameter>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DnssecStatusForVerifiedDomain.md

@@ -34,7 +34,7 @@ Get-DnssecStatusForVerifiedDomain [-DomainName] <String>
 ## DESCRIPTION
 For more information about debugging, enabling, and disabling SMTP DANE with DNSSEC, see [How SMTP DANE works](https://learn.microsoft.com/purview/how-smtp-dane-works).
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DomainController.md

@@ -40,7 +40,7 @@ Get-DomainController [-DomainName <Fqdn>]
 
 The Get-DomainController cmdlet is used by the Exchange admin center to populate fields that display ___domain controller information.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DynamicDistributionGroup.md

@@ -90,7 +90,7 @@ Get-DynamicDistributionGroup [-ManagedBy <GeneralRecipientIdParameter>]
 ## DESCRIPTION
 A dynamic distribution group queries mail-enabled objects and builds the group membership based on the results. The group membership is recalculated whenever an email message is sent to the group.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Get-DynamicDistributionGroupMember.md

@@ -32,7 +32,7 @@ Get-DynamicDistributionGroupMember [-Identity] <DynamicDistributionGroupMemberId
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES