Removed en-us from the URL

Author: KumarVivek

ThirdPartyNotices

@@ -9,7 +9,7 @@ may be either trademarks or registered trademarks of Microsoft in the United Sta
 The licenses for this project do not grant you rights to use any Microsoft names, logos, or trademarks.
 Microsoft's general trademark guidelines can be found at https://go.microsoft.com/fwlink/?LinkID=254653.
 
-Privacy information can be found at https://privacy.microsoft.com/en-us/
+Privacy information can be found at https://privacy.microsoft.com/
 
 Microsoft and any contributors reserve all others rights, whether under their respective copyrights, patents,
 or trademarks, whether by implication, estoppel or otherwise.

pending-deleted-files.md

@@ -1,6 +1,6 @@
 # Pending deleted files tracking
 
-This file tracks files marked for deletion. Localization requirements mean that topic file deletions need to be coordinated. See [Deleting or renaming topic files](https://review.docs.microsoft.com/en-us/bacx/delete-rename?branch=master) for more information.
+This file tracks files marked for deletion. Localization requirements mean that topic file deletions need to be coordinated. See [Deleting or renaming topic files](https://review.docs.microsoft.com/bacx/delete-rename?branch=master) for more information.
 
 ## Files queued for deletion
 

powerapps-docs/developer/common-data-service/build-tools-tasks.md

@@ -35,7 +35,7 @@ The PowerApps checker task runs a static analysis check on your solution(s) agai
 | PowerApps checker service  |   Select the service endpoint for PowerApps checker. The service   endpoint is defined under **Service Connections** in **Project Settings**.  **NOTE:** The service connection type that must be used for this specific task only is ‘PowerApps Checker,’ which is a service principals connection. More information on how to configure Service Principals before you can use the  task is available [here](https://aka.ms/buildtoolsconnection).  |
 | Location of file to analyze  | Specify whether to reference a local file or a reference file from a Sas url. 
 | Local files to analyze/Sas uri for file to analyze |  Specify the path and file name of the zip files to analyze.   Wildcards can be used. For example, **\*.zip   for all zip files in all sub folders. You can choose to specify the files   directly or reference a File from a Sas uri.   |
-|  Rule set |   Specify which ruleset to apply. The following two rulesets are available:  **Solution Checker:** This is the same ruleset that is run from the [Maker Portal](https://make.powerapps.com/).    **AppSource:** This is the extended ruleset that is used to certify an application before it can be published to [AppSource](https://appsource.microsoft.com/en-US/).   |
+|  Rule set |   Specify which ruleset to apply. The following two rulesets are available:  **Solution Checker:** This is the same ruleset that is run from the [Maker Portal](https://make.powerapps.com/).    **AppSource:** This is the extended ruleset that is used to certify an application before it can be published to [AppSource](https://appsource.microsoft.com/).   |
 
 ### Configure service connection for PowerApps checker
 

powerapps-docs/developer/common-data-service/event-framework.md

@@ -62,7 +62,7 @@ $filter=iscustomprocessingstepallowed eq true and isvisible eq true)
 ```
 
 > [!TIP]
-> You can export this data to an Excel worksheet using this query and the instructions provided in this blog post: [Find Messages and entities eligible for plug-ins using the Common Data Service](https://powerapps.microsoft.com/en-us/blog/find-messages-and-entities-eligible-for-plug-ins-using-the-common-data-service/)
+> You can export this data to an Excel worksheet using this query and the instructions provided in this blog post: [Find Messages and entities eligible for plug-ins using the Common Data Service](https://powerapps.microsoft.com/blog/find-messages-and-entities-eligible-for-plug-ins-using-the-common-data-service/)
 
 
 You can also use the following FetchXML to retrieve this information. The [FetchXML Builder](https://fxb.xrmtoolbox.com) is a useful tool to execute this kind of query.

powerapps-docs/developer/common-data-service/image-attributes.md

@@ -22,7 +22,7 @@ Certain system entities and all custom entities support images. Those entities t
 Web API (REST) | .NET API (SOAP) 
 ------- | -------
 [ImageAttributeMetadata](/dynamics365/customer-engagement/web-api/imageattributemetadata) | <xref:Microsoft.Xrm.Sdk.Metadata.ImageAttributeMetadata>
-IsPrimaryImage, MaxHeight, MaxWidth | [IsPrimaryImage](https://docs.microsoft.com/dotnet/api/microsoft.xrm.sdk.metadata.imageattributemetadata.isprimaryimage?view=dynamics-general-ce-9#Microsoft_Xrm_Sdk_Metadata_ImageAttributeMetadata_IsPrimaryImage), [MaxHeight](https://docs.microsoft.com/en-us/dotnet/api/microsoft.xrm.sdk.metadata.imageattributemetadata.maxheight?view=dynamics-general-ce-9), [MaxWidth](https://docs.microsoft.com/en-us/dotnet/api/microsoft.xrm.sdk.metadata.imageattributemetadata.maxwidth?view=dynamics-general-ce-9)
+IsPrimaryImage, MaxHeight, MaxWidth | [IsPrimaryImage](https://docs.microsoft.com/dotnet/api/microsoft.xrm.sdk.metadata.imageattributemetadata.isprimaryimage?view=dynamics-general-ce-9#Microsoft_Xrm_Sdk_Metadata_ImageAttributeMetadata_IsPrimaryImage), [MaxHeight](https://docs.microsoft.com/dotnet/api/microsoft.xrm.sdk.metadata.imageattributemetadata.maxheight?view=dynamics-general-ce-9), [MaxWidth](https://docs.microsoft.com/dotnet/api/microsoft.xrm.sdk.metadata.imageattributemetadata.maxwidth?view=dynamics-general-ce-9)
 
 In addition to image attributes, custom entities support zero or more file attributes that can contain any file data. These file attributes can contain a much larger amount of data than image attributes. For more information see [File attributes](file-attributes.md).
 

powerapps-docs/developer/common-data-service/introduction-solutions.md

@@ -31,7 +31,7 @@ Every customization that you make to Common Data Service, or to a previously ins
 If you intend to transport customizations or extensions between different Common Data Service environments or distribute solutions using AppSource, you must understand the solution framework.
 
 > [!NOTE]
-> For detailed information about how to effectively use solutions for a successful application lifecycle management (ALM) implementation, see [Whitepaper: Solution Lifecycle Management](https://www.microsoft.com/en-us/download/details.aspx?id=57777)
+> For detailed information about how to effectively use solutions for a successful application lifecycle management (ALM) implementation, see [Whitepaper: Solution Lifecycle Management](https://www.microsoft.com/download/details.aspx?id=57777)
 
 ## Managed and unmanaged solutions
 

powerapps-docs/developer/common-data-service/online-management-api/authentication.md

@@ -15,7 +15,7 @@ search.app:
 ---
 # Authenticate to use the Online Management API
 
-Online Management API supports OAuth 2.0 protocol for authentication. Use [Azure Active Directory (AAD)](https://docs.microsoft.com/en-us/azure/active-directory/active-directory-whatis) to authenticate by obtaining a valid OAuth 2.0 access token, and pass it using the **Authorization** header in your requests to the Online Management API.
+Online Management API supports OAuth 2.0 protocol for authentication. Use [Azure Active Directory (AAD)](https://docs.microsoft.com/azure/active-directory/active-directory-whatis) to authenticate by obtaining a valid OAuth 2.0 access token, and pass it using the **Authorization** header in your requests to the Online Management API.
 
 The recommended authentication API to use with the Online Management API is [Azure Active Directory Authentication Library (ADAL)](https://docs.microsoft.com/azure/active-directory/develop/active-directory-authentication-libraries), which is available for a wide variety of platforms and programming languages. 
 

powerapps-docs/developer/common-data-service/online-management-api/get-started-online-management-api.md

@@ -24,7 +24,7 @@ To use the Online Management API, you must have one of the following admin roles
 - Global administrator
 - Service administrator
 
-For information about these roles, see [About Office 365 admin roles](https://support.office.com/en-us/article/About-Office-365-admin-roles-da585eea-f576-4f55-a1e0-87090b6aaa9d)
+For information about these roles, see [About Office 365 admin roles](https://support.office.com/article/About-Office-365-admin-roles-da585eea-f576-4f55-a1e0-87090b6aaa9d)
 
 ## Service URL
 
@@ -61,8 +61,8 @@ The Online Management API has following standard request and response headers.
 
 | Header | Type | Description  |
 |--------|------|--------------|
-|**Accept-Language**|String|Specifies the preferred language for the response. More information about the header: [Accept-Language (MDN web docs)](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Accept-Language)|
-|**Authorization**|String|Specifies the credentials to authenticate a user with the Online Management API service. More information about the header: [Authorization (MDN web docs)](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Authorization)|
+|**Accept-Language**|String|Specifies the preferred language for the response. More information about the header: [Accept-Language (MDN web docs)](https://developer.mozilla.org/docs/Web/HTTP/Headers/Accept-Language)|
+|**Authorization**|String|Specifies the credentials to authenticate a user with the Online Management API service. More information about the header: [Authorization (MDN web docs)](https://developer.mozilla.org/docs/Web/HTTP/Headers/Authorization)|
 
 See [Authenticate to use the Online Management API](authentication.md) to know about setting these headers in your request.
 

powerapps-docs/developer/common-data-service/walkthrough-registering-configuring-simplespa-application-adal-js.md

@@ -288,7 +288,7 @@ Finally, you can click on **Logout** button to logout.
 1. Sign in to the [Azure portal](https://go.microsoft.com/fwlink/?linkid=2083908) using an account with administrator permission. You must use an account in the same Office 365 subscription (tenant) as you intend to register the app with. You can also access the Azure portal through the Microsoft 365 admin center by expanding the **ADMIN** item in the left navigation pane and selecting **Azure AD**.  
 
     > [!NOTE]
-    > If you don’t have an Azure tenant (account) or you do have one but your Office 365 subscription with Common Data Service is not available in your Azure subscription, following the instructions in the topic [Set up Azure Active Directory access for your Developer Site](https://docs.microsoft.com/en-us/office/developer-program/office-365-developer-program) to associate the two accounts.<br/><br/> If you don’t have an account, you can sign up for one by using a credit card. However, the account is free for application registration and your credit card won’t be charged if you only follow the procedures called out in this topic to register one or more apps. More information: [Active Directory Pricing Details](https://azure.microsoft.com/pricing/details/active-directory/).  
+    > If you don’t have an Azure tenant (account) or you do have one but your Office 365 subscription with Common Data Service is not available in your Azure subscription, following the instructions in the topic [Set up Azure Active Directory access for your Developer Site](https://docs.microsoft.com/office/developer-program/office-365-developer-program) to associate the two accounts.<br/><br/> If you don’t have an account, you can sign up for one by using a credit card. However, the account is free for application registration and your credit card won’t be charged if you only follow the procedures called out in this topic to register one or more apps. More information: [Active Directory Pricing Details](https://azure.microsoft.com/pricing/details/active-directory/).  
 
 2. Click on **Azure Active Directory** in the left column of the page. You may need to scroll the left column to see the **Azure Active Directory** icon and label.  
 

powerapps-docs/developer/component-framework/component-framework-for-canvas-apps.md

@@ -36,7 +36,7 @@ System Administrator privileges are required to enable the PowerApps component f
 
 To add code components to an app, you need to enable the PowerApps component framework feature in each environment where you want to use them. To enable an environment to use code components inside its apps:
 
-1. Sign in to [PowerApps](https://powerapps.microsoft.com/en-us/).
+1. Sign in to [PowerApps](https://powerapps.microsoft.com/).
 
 2. Select the **Settings** icon and then select **Admin Center**.
 
@@ -74,7 +74,7 @@ To add code components to a canvas app:
 2. Create a new canvas app or edit an existing app to which you want to add the code component.
 
    > [!IMPORTANT]
-   > Make sure the solution zip file is already [imported](https://docs.microsoft.com/en-us/powerapps/maker/common-data-service/import-update-export-solutions) into Common Data Service before you proceed to the next step.
+   > Make sure the solution zip file is already [imported](https://docs.microsoft.com/powerapps/maker/common-data-service/import-update-export-solutions) into Common Data Service before you proceed to the next step.
 
 3. Go to **Insert** > **Components** > **Import component**.