Acrolinx 14

exchange/exchange-ps/ExchangePowerShell/Set-LinkedUser.md

@@ -32,7 +32,7 @@ Set-LinkedUser [-Identity] <UserIdParameter>
 ## DESCRIPTION
 The OLSync service account is the only linked user in your organization. By default, the account is named GALSync-ServiceAccount.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Set-M365DataAtRestEncryptionPolicy.md

@@ -46,7 +46,7 @@ Set-M365DataAtRestEncryptionPolicy [-Identity] <DataEncryptionPolicyIdParameter>
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -62,7 +62,7 @@ This example disabled the Microsoft 365 data-at-rest encryption policy named Ten
 Set-M365DataAtRestEncryptionPolicy -Identity "Tenant Default Policy" -Refresh
 ```
 
-This example updates the Microsoft 365 data-at-rest encryption policy named Tenant Default Policy after one of the associated keys has been rotated in the Azure Key Vault.
+This example updates the Microsoft 365 data-at-rest encryption policy named Tenant Default Policy after one of the associated keys is rotated in the Azure Key Vault.
 
 ## PARAMETERS
 
@@ -151,7 +151,7 @@ Accept wildcard characters: False
 
 The Enabled parameter specifies whether the policy is enabled or disabled. Valid values are:
 
-- $true: The policy is enabled. This is the default value.
+- $true: The policy is enabled. This value is the default.
 - $false: The policy is disabled.
 
 ```yaml

exchange/exchange-ps/ExchangePowerShell/Set-M365DataAtRestEncryptionPolicyAssignment.md

@@ -26,7 +26,7 @@ Set-M365DataAtRestEncryptionPolicyAssignment -DataEncryptionPolicy <DataEncrypti
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Set-MailContact.md

@@ -13,7 +13,7 @@ title: Set-MailContact
 # Set-MailContact
 
 ## SYNOPSIS
-This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
+This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
 
 Use the Set-MailContact cmdlet to modify existing mail contacts.
 
@@ -93,7 +93,7 @@ Set-MailContact [-Identity] <MailContactIdParameter>
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -367,7 +367,7 @@ This parameter is available only in on-premises Exchange.
 
 The CreateDTMFMap parameter specifies whether to create a dual-tone multiple-frequency (DTMF) map for the recipient. This allows the recipient to be identified by using a telephone keypad in Unified Messaging (UM) environments. Valid values are:
 
-- $true: A DTMF map is created for the recipient. This is the default value.
+- $true: A DTMF map is created for the recipient. This value is the default.
 - $false: A DTMF map isn't created for the recipient.
 
 ```yaml
@@ -737,7 +737,7 @@ This parameter is available only in on-premises Exchange.
 
 The EmailAddressPolicyEnabled parameter specifies whether to apply email address policies to this recipient. Valid values are:
 
-- $true: Email address policies are applied to this recipient. This is the default value.
+- $true: Email address policies are applied to this recipient. This value is the default.
 - $false: Email address policies aren't applied to this recipient.
 
 ```yaml
@@ -762,7 +762,7 @@ To enter multiple values that overwrite any existing entries, use the following
 
 To add or remove one or more values without affecting any existing entries, use the following syntax: `@{Add="Value1","Value2"...; Remove="Value3","Value4"...}`.
 
-Although this is a multivalued property, the filter `"ExtensionCustomAttribute1 -eq 'Value'"` will return a match if the property _contains_ the specified value.
+Although this is a multivalued property, the filter `"ExtensionCustomAttribute1 -eq 'Value'"` returns a match if the property _contains_ the specified value.
 
 ```yaml
 Type: MultiValuedProperty
@@ -786,7 +786,7 @@ To enter multiple values that overwrite any existing entries, use the following
 
 To add or remove one or more values without affecting any existing entries, use the following syntax: `@{Add="Value1","Value2"...; Remove="Value3","Value4"...}`.
 
-Although this is a multivalued property, the filter `"ExtensionCustomAttribute2 -eq 'Value'"` will return a match if the property _contains_ the specified value.
+Although this is a multivalued property, the filter `"ExtensionCustomAttribute2 -eq 'Value'"` returns a match if the property _contains_ the specified value.
 
 ```yaml
 Type: MultiValuedProperty
@@ -810,7 +810,7 @@ To enter multiple values that overwrite any existing entries, use the following
 
 To add or remove one or more values without affecting any existing entries, use the following syntax: `@{Add="Value1","Value2"...; Remove="Value3","Value4"...}`.
 
-Although this is a multivalued property, the filter `"ExtensionCustomAttribute3 -eq 'Value'"` will return a match if the property _contains_ the specified value.
+Although this is a multivalued property, the filter `"ExtensionCustomAttribute3 -eq 'Value'"` returns a match if the property _contains_ the specified value.
 
 ```yaml
 Type: MultiValuedProperty
@@ -834,7 +834,7 @@ To enter multiple values that overwrite any existing entries, use the following
 
 To add or remove one or more values without affecting any existing entries, use the following syntax: `@{Add="Value1","Value2"...; Remove="Value3","Value4"...}`.
 
-Although this is a multivalued property, the filter `"ExtensionCustomAttribute4 -eq 'Value'"` will return a match if the property _contains_ the specified value.
+Although this is a multivalued property, the filter `"ExtensionCustomAttribute4 -eq 'Value'"` returns a match if the property _contains_ the specified value.
 
 ```yaml
 Type: MultiValuedProperty
@@ -858,7 +858,7 @@ To enter multiple values that overwrite any existing entries, use the following
 
 To add or remove one or more values without affecting any existing entries, use the following syntax: `@{Add="Value1","Value2"...; Remove="Value3","Value4"...}`.
 
-Although this is a multivalued property, the filter `"ExtensionCustomAttribute5 -eq 'Value'"` will return a match if the property _contains_ the specified value.
+Although this is a multivalued property, the filter `"ExtensionCustomAttribute5 -eq 'Value'"` returns a match if the property _contains_ the specified value.
 
 ```yaml
 Type: MultiValuedProperty
@@ -956,7 +956,7 @@ Accept wildcard characters: False
 The HiddenFromAddressListsEnabled parameter specifies whether this recipient is visible in address lists. Valid values are:
 
 - $true: The recipient isn't visible in address lists.
-- $false: The recipient is visible in address lists. This is the default value.
+- $false: The recipient is visible in address lists. This value is the default.
 
 ```yaml
 Type: Boolean
@@ -1001,7 +1001,7 @@ Accept wildcard characters: False
 
 The MacAttachmentFormat parameter specifies the Apple Macintosh operating system attachment format to use for messages sent to the mail contact or mail user. Valid values are:
 
-- BinHex (This is the default value)
+- BinHex (default value)
 - UuEncode
 - AppleSingle
 - AppleDouble
@@ -1087,7 +1087,7 @@ When you enter a value, qualify the value with one of the following units:
 - MB (megabytes)
 - GB (gigabytes)
 
-Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.
+Unqualified values are typically treated as bytes, but small values might be rounded up to the nearest kilobyte.
 
 A valid value is a number up to 1.999999 gigabytes (2147483647 bytes) or the value unlimited. The default value is unlimited.
 
@@ -1146,7 +1146,7 @@ When you enter a value, qualify the value with one of the following units:
 - MB (megabytes)
 - GB (gigabytes)
 
-Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.
+Unqualified values are typically treated as bytes, but small values might be rounded up to the nearest kilobyte.
 
 A valid value is a number up to 1.999999 gigabytes (2147483647 bytes) or the value unlimited. The default value is unlimited.
 
@@ -1174,7 +1174,7 @@ The MessageBodyFormat parameter specifies the message body format for messages s
 
 - Text
 - Html
-- TextAndHtml (This is the default value)
+- TextAndHtml (default value)
 
 The MessageFormat and MessageBodyFormat parameters are interdependent:
 
@@ -1200,7 +1200,7 @@ Accept wildcard characters: False
 The MessageFormat parameter specifies the message format for messages sent to the mail contact or mail user. Valid values are:
 
 - Text
-- Mime (This is the default value)
+- Mime (default value)
 
 The MessageFormat and MessageBodyFormat parameters are interdependent:
 
@@ -1259,7 +1259,7 @@ Accept wildcard characters: False
 The ModerationEnabled parameter specifies whether moderation is enabled for this recipient. Valid value are:
 
 - $true: Moderation is enabled for this recipient. Messages sent to this recipient must be approved by a moderator before the messages are delivered.
-- $false: Moderation is disabled for this recipient. Messages sent to this recipient are delivered without the approval of a moderator. This is the default value.
+- $false: Moderation is disabled for this recipient. Messages sent to this recipient are delivered without the approval of a moderator. This value is the default.
 
 You use the ModeratedBy parameter to specify the moderators.
 
@@ -1537,7 +1537,7 @@ Accept wildcard characters: False
 
 The SendModerationNotifications parameter specifies when moderation notification messages are sent. Valid values are:
 
-- Always: Notify all senders when their messages aren't approved. This is the default value.
+- Always: Notify all senders when their messages aren't approved. This value is the default.
 - Internal: Notify senders in the organization when their messages aren't approved.
 - Never: Don't notify anyone when a message isn't approved.
 
@@ -1642,7 +1642,7 @@ Accept wildcard characters: False
 The UsePreferMessageFormat specifies whether the message format settings configured for the mail user or mail contact override the global settings configured for the remote ___domain or configured by the message sender. Valid value are:
 
 - $true: Messages sent to the mail user or mail contact use the message format that's configured for the mail user or mail contact.
-- $false: Messages sent to the mail user or mail contact use the message format that's configured for the remote ___domain (the default remote ___domain or a specific remote ___domain) or configured by the message sender. This is the default value.
+- $false: Messages sent to the mail user or mail contact use the message format that's configured for the remote ___domain (the default remote ___domain or a specific remote ___domain) or configured by the message sender. This value is the default.
 
 ```yaml
 Type: Boolean