MicrosoftDocs · Ruchika-mittal01 · Aug 6, 2025 · Aug 4, 2025 · Aug 4, 2025 · Aug 4, 2025
diff --git a/exchange/exchange-ps/ExchangePowerShell/Add-AvailabilityAddressSpace.md b/exchange/exchange-ps/ExchangePowerShell/Add-AvailabilityAddressSpace.md
@@ -81,8 +81,8 @@ In Exchange Online, this example sets up the sharing of free/busy information wi
 The AccessMethod parameter specifies how the free/busy data is accessed. Valid values are:
 
 - PerUserFB: Per-user free/busy information can be requested. The free/busy data is accessed in the defined per-user free/busy proxy account or group, or in the All Exchange Servers group. This value requires a trust between the two forests, and requires you to use either the UseServiceAccount parameter or Credentials parameter.
-- OrgWideFB: Only default free/busy for each user can be requested. The free/busy data is accessed in the per-user free/busy proxy account or group in the target forest. This value requires you to use either the UseServiceAccount parameter or Credentials parameter.
-- OrgWideFBBasic: Free/busy sharing between tenants that are all in Exchange Online.
+- OrgWideFB: Only the default free/busy for each user can be requested. The free/busy data is accessed in the per-user free/busy proxy account or group in the target forest. This value requires you to use either the UseServiceAccount parameter or Credentials parameter. This value is deprecated for accessing target forests in Exchange Online.
+- OrgWideFBToken: Used for free/busy sharing between two tenants in Exchange Online. Only the default free/busy for each user can be requested. This value also requires you to set both the TargetTenantId and TargetServiceEpr parameters.
 - InternalProxy: The request is proxied to an Exchange server in the site that's running a later version of Exchange.
 - PublicFolder: This value was used to access free/busy data on Exchange Server 2003 servers.
 
@@ -229,6 +229,8 @@ The TargetServiceEpr parameter specifies the Exchange Online Calendar Service UR
 - Office 365 operated by 21Vianet: partner.outlook.cn
 - Microsoft 365 GCC High or DoD: outlook.office365.us
 
+You use this parameter only when the AccessMethod parameter value is OrgWideFBToken.
+
 ```yaml
 Type: String
 Parameter Sets: (All)
@@ -249,6 +251,8 @@ This parameter is available only in the cloud-based service.
 
 The TargetTenantID parameter specifies the tenant ID of the external Microsoft 365 organization that you're trying to read free/busy information from.
 
+You use this parameter only when the AccessMethod parameter value is OrgWideFBToken.
+
 ```yaml
 Type: String
 Parameter Sets: (All)

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DataEncryptionPolicy.md b/exchange/exchange-ps/ExchangePowerShell/Get-DataEncryptionPolicy.md
@@ -34,7 +34,7 @@ Data encryption policy cmdlets are the Exchange Online part of Customer Key. For
 
 You can assign a data encryption policy to a mailbox by using the DataEncryptionPolicy parameter on the Set-Mailbox cmdlet in Exchange Online PowerShell.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DeliveryAgentConnector.md b/exchange/exchange-ps/ExchangePowerShell/Get-DeliveryAgentConnector.md
@@ -30,7 +30,7 @@ Get-DeliveryAgentConnector [[-Identity] <DeliveryAgentConnectorIdParameter>]
 ## DESCRIPTION
 Delivery agent connectors are used to route messages addressed to foreign systems that don't use the SMTP protocol. When a message is routed to a delivery agent connector, the associated delivery agent performs the content conversion and message delivery. Delivery agent connectors allow queue management of foreign connectors, thereby eliminating the need for storing messages on the file system in Drop and Pickup directories. For more information, see [Delivery agents and Delivery Agent connectors](https://learn.microsoft.com/exchange/delivery-agents-and-delivery-agent-connectors-exchange-2013-help).
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DetailZapReport.md b/exchange/exchange-ps/ExchangePowerShell/Get-DetailZapReport.md
@@ -48,7 +48,7 @@ If you append the command with ` | Format-List`, the following additional inform
 - Delivery Status
 - Detection Technology
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DetailsTemplate.md b/exchange/exchange-ps/ExchangePowerShell/Get-DetailsTemplate.md
@@ -32,7 +32,7 @@ Get-DetailsTemplate [[-Identity] <DetailsTemplateIdParameter>]
 ## DESCRIPTION
 The Get-DetailsTemplate cmdlet retrieves the attributes for one or more details templates. Wildcard characters can be used when specifying the type and language of the details templates.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DistributionGroup.md b/exchange/exchange-ps/ExchangePowerShell/Get-DistributionGroup.md
@@ -85,7 +85,7 @@ Get-DistributionGroup [-Credential <PSCredential>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DistributionGroupMember.md b/exchange/exchange-ps/ExchangePowerShell/Get-DistributionGroupMember.md
@@ -35,7 +35,7 @@ Get-DistributionGroupMember [-Identity] <DistributionGroupMemberIdParameter>
 ## DESCRIPTION
 If your organization has multiple Active Directory domains, you might need to run the Set-ADServerSettings cmdlet with the ViewEntireForest parameter set to $true before running the Get-DistributionGroupMember cmdlet to view the entire forest. For more information, see Example 2.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DkimSigningConfig.md b/exchange/exchange-ps/ExchangePowerShell/Get-DkimSigningConfig.md
@@ -29,7 +29,7 @@ Get-DkimSigningConfig [[-Identity] <DkimSigningConfigIdParameter>]
 ## DESCRIPTION
 DKIM in Microsoft 365 is an email authentication method that uses a public key infrastructure (PKI), message headers and CNAME records in DNS to authenticate the message sender, which is stamped in the DKIM-Signature header field. DKIM helps prevent forged sender email addresses (also known as spoofing) by verifying that the ___domain in the From address matches the ___domain in the DKIM-Signature header field.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DlpDetailReport.md b/exchange/exchange-ps/ExchangePowerShell/Get-DlpDetailReport.md
@@ -61,7 +61,7 @@ The Get-DlpDetailReport cmdlet returns detailed information about specific DLP r
 
 To see DLP detection data that's aggregated per day, use the [Get-DlpDetectionsReport](https://learn.microsoft.com/powershell/module/exchangepowershell/get-dlpdetectionsreport) cmdlet.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DlpDetectionsReport.md b/exchange/exchange-ps/ExchangePowerShell/Get-DlpDetectionsReport.md
@@ -53,7 +53,7 @@ To see all of these columns (width issues), write the output to a file. For exam
 
 To see detailed information about each DLP rule match, use the Get-DlpDetailReport cmdlet.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DlpIncidentDetailReport.md b/exchange/exchange-ps/ExchangePowerShell/Get-DlpIncidentDetailReport.md
@@ -66,7 +66,7 @@ The output of the Get-DlpIncidentDetailReport cmdlet includes the following prop
 - SensitiveInformationCountList
 - SensitiveInformationConfidenceList
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DlpPolicy.md b/exchange/exchange-ps/ExchangePowerShell/Get-DlpPolicy.md
@@ -30,7 +30,7 @@ Get-DlpPolicy [[-Identity] <DlpPolicyIdParameter>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DlpPolicyTemplate.md b/exchange/exchange-ps/ExchangePowerShell/Get-DlpPolicyTemplate.md
@@ -30,7 +30,7 @@ Get-DlpPolicyTemplate [[-Identity] <DlpPolicyIdParameter>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DnssecStatusForVerifiedDomain.md b/exchange/exchange-ps/ExchangePowerShell/Get-DnssecStatusForVerifiedDomain.md
@@ -34,7 +34,7 @@ Get-DnssecStatusForVerifiedDomain [-DomainName] <String>
 ## DESCRIPTION
 For more information about debugging, enabling, and disabling SMTP DANE with DNSSEC, see [How SMTP DANE works](https://learn.microsoft.com/purview/how-smtp-dane-works).
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

diff --git a/exchange/exchange-ps/ExchangePowerShell/Get-DomainController.md b/exchange/exchange-ps/ExchangePowerShell/Get-DomainController.md
@@ -40,7 +40,7 @@ Get-DomainController [-DomainName <Fqdn>]
 
 The Get-DomainController cmdlet is used by the Exchange admin center to populate fields that display ___domain controller information.
 
-You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES