Acrolinx 15

exchange/exchange-ps/ExchangePowerShell/Set-SecOpsOverridePolicy.md

@@ -35,7 +35,7 @@ Set-SecOpsOverridePolicy [-Identity] <PolicyIdParameter>
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -154,7 +154,7 @@ Accept wildcard characters: False
 
 The Enabled parameter specifies whether the policy is enabled. Valid values are:
 
-- $true: The policy is enabled. This is the default value.
+- $true: The policy is enabled. This value is the default.
 - $false: The policy is disabled.
 
 ```yaml

exchange/exchange-ps/ExchangePowerShell/Set-SendConnector.md

@@ -63,7 +63,7 @@ Set-SendConnector [-Identity] <SendConnectorIdParameter>
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -103,7 +103,7 @@ Accept wildcard characters: False
 
 The AddressSpaces parameter specifies the ___domain names to which the Send connector routes mail. The complete syntax for entering each address space is: `AddressSpaceType:AddressSpace;AddressSpaceCost`.
 
-- AddressSpaceType: On an Edge server, the address space type must be SMTP. In the Transport service on a Mailbox server, the address space type may be SMTP, X400, or any other text string. If you omit the address space type, SMTP is assumed.
+- AddressSpaceType: On an Edge server, the address space type must be SMTP. In the Transport service on a Mailbox server, the address space type might be SMTP, X400, or any other text string. If you omit the address space type, SMTP is assumed.
 - AddressSpace: For SMTP address space types, the address space that you enter must be RFC 1035-compliant. For example, \*, \*.com, and \*.contoso.com are permitted, but \*contoso.com is not. For X.400 address space types, the address space that you enter must be RFC 1685-compliant, such as o=MySite;p=MyOrg;a=adatum;c=us. For all other values of address space type, you can enter any text for the address space.
 - AddressSpaceCost: The valid input range for the cost is from 1 through 100. A lower cost indicates a better route. This parameter is optional. If you omit the address space cost, a cost of 1 is assumed. If you enter a non-SMTP address space that contains the semicolon character (;), you must specify the address space cost.
 
@@ -114,7 +114,7 @@ If you specify the address space type or the address space cost, you must enclos
 - "SMTP:contoso.com"
 - contoso.com
 
-You may specify multiple address spaces by separating the address spaces with commas, for example: contoso.com,fabrikam.com. If you specify the address space type or the address space cost, enclose the address space in quotation marks ("), for example: "contoso.com;2","fabrikam.com;3".
+You might specify multiple address spaces by separating the address spaces with commas, for example: contoso.com,fabrikam.com. If you specify the address space type or the address space cost, enclose the address space in quotation marks ("), for example: "contoso.com;2","fabrikam.com;3".
 
 If you specify a non-SMTP address space type on a Send connector configured in the Transport service on a Mailbox server, you must configure the following parameters:
 
@@ -165,7 +165,7 @@ The CloudServicesMailEnabled parameter specifies whether the connector is used f
 
 Valid values are:
 
-- $true: The connector is used for mail flow in hybrid organizations, so cross-premises headers are preserved or promoted in messages that flow through the connector. This is the default value for connectors that are created by the Hybrid Configuration wizard. Certain X-MS-Exchange-Organization-\* headers in outbound messages that are sent from one side of the hybrid organization to the other are converted to X-MS-Exchange-CrossPremises-\* headers and are thereby preserved in messages. X-MS-Exchange-CrossPremises-\* headers in inbound messages that are received on one side of the hybrid organization from the other are promoted to X-MS-Exchange-Organization-\* headers. These promoted headers replace any instances of the same X-MS-Exchange-Organization-\* headers that already exist in messages.
+- $true: The connector is used for mail flow in hybrid organizations, so cross-premises headers are preserved or promoted in messages that flow through the connector. This value is the default for connectors that are created by the Hybrid Configuration wizard. Certain X-MS-Exchange-Organization-\* headers in outbound messages that are sent from one side of the hybrid organization to the other are converted to X-MS-Exchange-CrossPremises-\* headers and are thereby preserved in messages. X-MS-Exchange-CrossPremises-\* headers in inbound messages that are received on one side of the hybrid organization from the other are promoted to X-MS-Exchange-Organization-\* headers. These promoted headers replace any instances of the same X-MS-Exchange-Organization-\* headers that already exist in messages.
 - $false: The connector isn't used for mail flow in hybrid organizations, so any cross-premises headers are removed from messages that flow through the connector.
 
 ```yaml
@@ -225,7 +225,7 @@ Accept wildcard characters: False
 
 The ConnectorType parameter specifies whether the connector is used in hybrid deployments to send messages to Microsoft 365. Valid values are:
 
-- Default: The connector isn't used to send messages to Microsoft 365. This is the default value.
+- Default: The connector isn't used to send messages to Microsoft 365. This value is the default.
 - XPremises: The connector is used to send messages to Microsoft 365.
 
 ```yaml
@@ -558,7 +558,7 @@ When you enter a value, qualify the value with one of the following units:
 - GB (gigabytes)
 - TB (terabytes)
 
-Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.
+Unqualified values are typically treated as bytes, but small values might be rounded up to the nearest kilobyte.
 
 The valid input range for this parameter is 0 to 2147483647 bytes. To remove the message size limit on a Send connector, enter a value of unlimited.
 

exchange/exchange-ps/ExchangePowerShell/Set-SenderFilterConfig.md

@@ -38,7 +38,7 @@ Set-SenderFilterConfig [-Action <BlockedSenderAction>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Set-SenderIdConfig.md

@@ -37,7 +37,7 @@ Set-SenderIdConfig
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Set-SenderReputationConfig.md

@@ -39,7 +39,7 @@ Set-SenderReputationConfig [-Confirm]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -103,7 +103,7 @@ Accept wildcard characters: False
 
 The Enabled parameter enables or disables sender reputation on the Exchange server. Valid values are:
 
-- $true: Sender reputation is enabled. This is the default value.
+- $true: Sender reputation is enabled. This value is the default.
 - $false: Sender reputation is disabled.
 
 ```yaml
@@ -124,7 +124,7 @@ Accept wildcard characters: False
 
 The ExternalMailEnabled parameter allows or prevents sender reputation from processing messages from unauthenticated connections that are external to your Exchange organization. Valid values are:
 
-- $true: Sender reputation is enabled on mail from external sources. This is the default value.
+- $true: Sender reputation is enabled on mail from external sources. This value is the default.
 - $false: Sender reputation is disabled on mail from external sources.
 
 ```yaml
@@ -146,7 +146,7 @@ Accept wildcard characters: False
 The InternalMailEnabled parameter allows or prevents sender reputation from processing messages from authenticated sender domains that are authoritative domains in your Exchange organization. Valid values are:
 
 - $true: Sender reputation is enabled on mail from internal sources.
-- $false: Sender reputation is disabled on mail from internal sources. This is the default value.
+- $false: Sender reputation is disabled on mail from internal sources. This value is the default.
 
 ```yaml
 Type: Boolean
@@ -166,14 +166,14 @@ Accept wildcard characters: False
 
 The OpenProxyDetectionEnabled parameter allows or prevents sender reputation from attempting to connect to the message's source IP address to send a test message back to the Exchange server. This test determines if the sender is an open proxy server. Valid values are:
 
-- $true: Open proxy server detection is enabled. This is the default value.
+- $true: Open proxy server detection is enabled. This value is the default.
 - $false: Open proxy server detection is disabled.
 
 Open proxy server detection requires the following open outbound TCP ports in your firewall: 23, 80, 1080, 1081, 3128, and 6588.
 
 If your organization uses a proxy server for outbound Internet access, you also need to define the properties of the proxy server by using the ProxyServerName, ProxyServerPort, and ProxyServerType parameters.
 
-The values of the OpenProxyDetectionEnabled and SenderBlockingEnabled parameters can both be set to $true, but they both can't be set to $false. If one value is $true and the other is $false, and you change the $true value to $false, the parameter that was previously $false will automatically change to $true.
+The values of the OpenProxyDetectionEnabled and SenderBlockingEnabled parameters can both be set to $true, but they both can't be set to $false. If one value is $true and the other is $false, and you change the $true value to $false, the parameter that was previously $false is automatically changed to $true.
 
 ```yaml
 Type: Boolean
@@ -233,7 +233,7 @@ Accept wildcard characters: False
 
 The ProxyServerType parameter specifies the type of your organization's proxy server. Sender reputation uses this value to connect to the Internet for open proxy server detection. Valid values are:
 
-- None: This is the default value.
+- None: This value is the default.
 - Cisco
 - HttpConnect
 - HttpPost
@@ -260,12 +260,12 @@ Accept wildcard characters: False
 
 The SenderBlockingEnabled parameter allows or prevents sender reputation from blocking senders when their sender reputation level (SRL) meets or exceeds the value of the SrlBlockThreshold parameter. Valid values are:
 
-- $true: Sender blocking is enabled. This is the default value.
+- $true: Sender blocking is enabled. This value is the default.
 - $false: Sender blocking is disabled.
 
 You can temporarily block senders for up to 48 hours when you use the SenderBlockingPeriod parameter.
 
-The values of the OpenProxyDetectionEnabled and SenderBlockingEnabled parameters can both be set to $true, but they both can't be set to $false. If one value is $true and the other is $false, and you change the $true value to $false, the parameter that was previously $false will automatically change to $true.
+The values of the OpenProxyDetectionEnabled and SenderBlockingEnabled parameters can both be set to $true, but they both can't be set to $false. If one value is $true and the other is $false, and you change the $true value to $false, the parameter that was previously $false is automatically changed to $true.
 
 ```yaml
 Type: Boolean

exchange/exchange-ps/ExchangePowerShell/Set-ServerComponentState.md

@@ -33,7 +33,7 @@ Set-ServerComponentState [-Identity] <ServerIdParameter> -Component <String> -Re
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Set-ServerMonitor.md

@@ -30,7 +30,7 @@ Set-ServerMonitor [-Server] <ServerIdParameter> -Name <String> -Repairing <Boole
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Set-ServicePrincipal.md

@@ -33,7 +33,7 @@ Set-ServicePrincipal [-Identity] <ServicePrincipalIdParameter>
 ## DESCRIPTION
 You can use this cmdlet to change the DisplayName only. If AppId/ObjectId is wrong, delete the service principal and create a new one.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Set-SettingOverride.md

@@ -40,7 +40,7 @@ Set-SettingOverride [-Identity] <SettingOverrideIdParameter>
 ## DESCRIPTION
 Setting overrides configure and store Exchange server customizations in Active Directory. The settings can be organization-wide or server-specific, and they persist in Active Directory across Exchange Cumulative Updates (CUs). Exchange customizations in web.config or exe.config XML application configuration files are server-specific, and they're lost when you install the next Exchange CU.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES