Acrolinx 16

exchange/exchange-ps/ExchangePowerShell/Test-OwaConnectivity.md

@@ -63,13 +63,13 @@ If the server hosting the test mailbox isn't available, the Test-OwaConnectivity
 
 If you run the Test-OwaConnectivity cmdlet on a Client Access server without using either the ClientAccessServer parameter or the URL parameter, the cmdlet tests the server on which you run the cmdlet. To test a specific Client Access server, use the ClientAccessServer parameter.
 
-To test a single URL, run the Test-OwaConnectivity cmdlet with the URL parameter and credentials for an existing Exchange mailbox. If the URL is behind a load balancer, you can't predict which Client Access server the command will test. Because credentials are required as part of the parameters when you use the URL parameter, you can use any account to run the Test-OwaConnectivity cmdlet when you use the URL parameter.
+To test a single URL, run the Test-OwaConnectivity cmdlet with the URL parameter and credentials for an existing Exchange mailbox. If the URL is behind a load balancer, you can't predict which Client Access server the command tests. Because credentials are required as part of the parameters when you use the URL parameter, you can use any account to run the Test-OwaConnectivity cmdlet when you use the URL parameter.
 
 If the command encounters a virtual directory that doesn't require Secure Sockets Layer (SSL), the command skips that directory unless the AllowUnsecureAccess parameter is used. If the AllowUnsecureAccess parameter is used, communications between servers are sent in clear text for purposes of the test.
 
 The Test-OwaConnectivity cmdlet can be run as a one-time interactive task or as a scheduled task under Microsoft System Center Operations Manager 2007 control. To run the Test-OwaConnectivity cmdlet as a System Center Operations Manager 2007 task, the Client Access test mailbox must be available on the Mailbox servers that the cmdlet tests against.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Test-PopConnectivity.md

@@ -17,7 +17,7 @@ This cmdlet is available only in on-premises Exchange.
 
 Use the Test-PopConnectivity cmdlet to verify that the Microsoft Exchange POP3 service is working as expected.
 
-**Note**: This cmdlet works best in Exchange 2010. In later versions of Exchange, the functionality of this cmdlet has been replaced by Managed Availability. For the best results, use the Invoke-MonitoringProbe cmdlet and specify the relevant active monitor probe instead of using this cmdlet.
+**Note**: This cmdlet works best in Exchange 2010. In later versions of Exchange, the functionality of this cmdlet is replaced by Managed Availability. For the best results, use the Invoke-MonitoringProbe cmdlet and specify the relevant active monitor probe instead of using this cmdlet.
 
 For information about the parameter sets in the Syntax section below, see [Exchange cmdlet syntax](https://learn.microsoft.com/powershell/exchange/exchange-cmdlet-syntax).
 
@@ -59,7 +59,7 @@ The test results are displayed on-screen. The cmdlet returns the following infor
 
 You can write the results to a file by piping the output to ConvertTo-Html and Set-Content. For example: `Test-PopConnectivity -ClientAccessServer MBX01 | ConvertTo-Html | Set-Content -Path "C:\My Documents\POP Test.html"`.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Test-PowerShellConnectivity.md

@@ -17,7 +17,7 @@ This cmdlet is available only in on-premises Exchange.
 
 Use the Test-PowerShellConnectivity cmdlet to test client connectivity to Exchange remote PowerShell virtual directories.
 
-**Note**: This cmdlet works best in Exchange 2010. In later versions of Exchange, the functionality of this cmdlet has been replaced by Managed Availability. For the best results, use the Invoke-MonitoringProbe cmdlet and specify the relevant active monitor probe instead of using this cmdlet.
+**Note**: This cmdlet works best in Exchange 2010. In later versions of Exchange, the functionality of this cmdlet is replaced by Managed Availability. For the best results, use the Invoke-MonitoringProbe cmdlet and specify the relevant active monitor probe instead of using this cmdlet.
 
 For information about the parameter sets in the Syntax section below, see [Exchange cmdlet syntax](https://learn.microsoft.com/powershell/exchange/exchange-cmdlet-syntax).
 
@@ -71,7 +71,7 @@ The test results are displayed on-screen. The cmdlet returns the following infor
 
 You can write the results to a file by piping the output to ConvertTo-Html and Set-Content. For example: `Test-PowerShellConnectivity -ClientAccessServer MBX01 | ConvertTo-Html | Set-Content -Path "C:\My Documents\PowerShell Test.html"`.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Test-ReplicationHealth.md

@@ -37,7 +37,7 @@ Test-ReplicationHealth [[-Identity] <ServerIdParameter>]
 ## DESCRIPTION
 The Test-ReplicationHealth cmdlet is designed for the proactive monitoring of continuous replication and the continuous replication pipeline, the availability of Active Manager and the health and status of the underlying cluster service, quorum and network components. The Test-ReplicationHealth cmdlet can be run locally or remotely against any Mailbox server in a DAG.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -163,7 +163,7 @@ Accept wildcard characters: False
 The MonitoringContext parameter specifies whether to include the associated monitoring events and performance counters in the results. Valid values are:
 
 - $true: Monitoring events and performance counters are included in the command results. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager (SCOM).
-- $false: Monitoring events and performance counters aren't included in the command results. This is the default value.
+- $false: Monitoring events and performance counters aren't included in the command results. This value is the default.
 
 ```yaml
 Type: Boolean

exchange/exchange-ps/ExchangePowerShell/Test-SenderId.md

@@ -34,7 +34,7 @@ Test-SenderId -IPAddress <IPAddress> -PurportedResponsibleDomain <SmtpDomain>
 ## DESCRIPTION
 The Test-SenderId cmdlet provides the results of a Sender ID check for the IP address and the corresponding ___domain name that you specify.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Test-ServiceHealth.md

@@ -32,9 +32,9 @@ Test-ServiceHealth [[-Server] <ServerIdParameter>]
 ```
 
 ## DESCRIPTION
-This cmdlet isn't supported on Exchange 2013 Client Access servers (the cmdlet will return unexpected output).
+This cmdlet isn't supported on Exchange 2013 Client Access servers (the cmdlet returns unexpected output).
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -138,7 +138,7 @@ Accept wildcard characters: False
 The MonitoringContext parameter specifies whether to include the associated monitoring events and performance counters in the results. Valid values are:
 
 - $true: Monitoring events and performance counters are included in the command results. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager (SCOM).
-- $false: Monitoring events and performance counters aren't included in the command results. This is the default value.
+- $false: Monitoring events and performance counters aren't included in the command results. This value is the default.
 
 ```yaml
 Type: Boolean

exchange/exchange-ps/ExchangePowerShell/Test-ServicePrincipalAuthorization.md

@@ -30,7 +30,7 @@ Test-ServicePrincipalAuthorization [-Identity] <ServicePrincipalIdParameter>
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Test-SiteMailbox.md

@@ -37,7 +37,7 @@ Test-SiteMailbox [[-Identity] <RecipientIdParameter>]
 ## DESCRIPTION
 If you don't specify the RequestorIdentity parameter, the command uses the identification of the user running this command.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Test-SmtpConnectivity.md

@@ -42,7 +42,7 @@ When you run the Test-SmtpConnectivity cmdlet against a Mailbox server, the cmdl
 
 You can write the results to a file by piping the output to ConvertTo-Html or ConvertTo-Csv and adding ` > <filename>` to the command. For example: `Test-SmtpConnectivity Mailbox01 | ConvertTo-Csv > "C:\My Documents\SMTP Test.csv"`.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 
@@ -137,7 +137,7 @@ Accept wildcard characters: False
 The MonitoringContext parameter specifies whether to include the associated monitoring events and performance counters in the results. Valid values are:
 
 - $true: Monitoring events and performance counters are included in the command results. Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager (SCOM).
-- $false: Monitoring events and performance counters aren't included in the command results. This is the default value.
+- $false: Monitoring events and performance counters aren't included in the command results. This value is the default.
 
 ```yaml
 Type: Boolean

exchange/exchange-ps/ExchangePowerShell/Test-SystemHealth.md

@@ -48,7 +48,7 @@ Test-SystemHealth [-ADCredentials <PSCredential>]
 ```
 
 ## DESCRIPTION
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES
 

exchange/exchange-ps/ExchangePowerShell/Test-TextExtraction.md

@@ -13,7 +13,7 @@ title: Test-TextExtraction
 # Test-TextExtraction
 
 ## SYNOPSIS
-This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings may be exclusive to one environment or the other.
+This cmdlet is available in on-premises Exchange and in the cloud-based service. Some parameters and settings might be exclusive to one environment or the other.
 
 Use the Test-TextExtraction cmdlet to return the text from unencrypted email message files.
 
@@ -34,7 +34,7 @@ This cmdlet doesn't work on encrypted email message files.
 
 The Microsoft classification engine uses the results to classify content and determine the sensitive information types in the message file.
 
-You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
+You need to be assigned permissions before you can run this cmdlet. Although this article lists all parameters for the cmdlet, you might not have access to some parameters if they aren't included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see [Find the permissions required to run any Exchange cmdlet](https://learn.microsoft.com/powershell/exchange/find-exchange-cmdlet-permissions).
 
 ## EXAMPLES